Should you replace a toilet when remodeling a bathroom? (2023)

Should you replace a toilet when remodeling a bathroom?

If you are doing a home remodel or redesign, it's the ideal time to change the toilet. With an abundance of choices, the toilet can actually accentuate the design and appearance of your home.

Is it worth replacing an old toilet?

Should I Replace My Old Toilet? While your old toilets may technically do their job, they're simply not as efficient as newer models. Not to mention if your old toilets start to show their age by cracking, leaking, or clogging, it's often best to consider toilet replacement rather than repair.

Can you reuse toilet bathroom remodel?

"When it comes to saving money on a bathroom renovation, one of the best things you can do is reuse as many of your existing fixtures and fittings as possible," said Martin. "If your bathroom cabinets, vanities and toilets are still in good condition, reuse them."

How do you know when it's time for a new toilet?

When remodeling a bathroom What should I pick first?

Install the vanity first, including the sink and faucet. Once you have the drain hooked up to the faucet, you can move on to the other essentials such as the mirror, cabinets and trim around the shower or tub.

Should you replace a 20 year old toilet?

For most toilets, a 20-year lifespan is the outer limit. A toilet may continue to work after this, but it will be at a higher risk of starting to leak and suffering from numerous clogs and other repair issues. Get ahead of the problem and replace a toilet that's 20 years or older.

What is a fair price for replacing a toilet?

Toilets, by themselves, can cost between $100 and $450 at home improvement stores and labor costs can vary, depending on the plumber and the amount of work needed. The total costs including labor and materials can range between $225 and $700 averaging at $375.

What is the life expectancy of a bathroom remodel?

In the bathroom remodeling industry, there is a general rule in terms of how often you should remodel your bathroom design. The general rule is that a bathroom remodel or renovation needs to be done every 10 years.

What can never be reused when replacing a toilet?

Step 4: Remove the Old Wax and Wax Ring

Wax rings can't be reused. With a putty knife, remove and discard the old wax ring. Stuff a rag in the hole to block sewer gases and prevent anything from falling into the drain. Remove any excess wax on the flange (the top of the drainpipe).

How hard is it to move a toilet in a bathroom remodel?

Moving a toilet is not a straightforward weekend DIY job, but it is very doable when you involve the professionals. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location.

How often should you buy a new toilet?

Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

How long does it take a professional to install a new toilet?

In essence, that depends on your skill level and experience, plus the type of toilet you have. If you've done this before, it should be a piece of cake. However, if it's your first time, and depending on the complexity of the job, it could take anything from one to four hours on average.

How many hours does it take to install a new toilet?

Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don't have a lot of DIY experience, you might want to add an hour or two to that timeframe.

What color bathroom for resale?

Best Colors for Resale Value

Currently, painting your bathroom light blue can increase the value of your home by $5000. A light blue hue invites a calm, serene, and relaxing environment that compliments almost any decor or design style. Light yellow, cream, beige, and gray are also favorites of prospective home buyers.

What are the hardest part of remodeling bathroom?

The hardest parts of a bathroom remodel are knowing where to start, planning and performing demolition, minimizing dust, visualizing the finish line, living with the inconvenience of not being able to use that bathroom, and managing the schedule.

What is the average age of a toilet?

One of the most used fixtures in your home, the toilet, on average has a lifespan of 10-15 years.

Is it cheaper to fix a toilet or replace it?

If you're planning on replacing your toilet anytime soon, then save the money on the repair and replace the toilet instead. This will save you money in the long run, even though it will be a bigger expense up front.

Which toilets last the longest?

What is the difference between expensive and cheap toilets?

Toilet design is the main factor in determining why some toilets cost more than others. Generally speaking, one-piece, wall hung toilets tend to be more expensive than alternative styles. They incorporate a slick, sleeker appearance than their counterparts, and feature less crevices which makes them easier to clean.

Can you just replace a toilet?

“Most homeowners can replace their toilet if they have the proper materials, tools, and background knowledge,” he admits. “They also need to be able to lift it too.” Here's everything you need to know about how to install a toilet, and how to get the job done in eight steps.

Can a new toilet save money?

Even just changing out an old toilet for the new standard will make a significant impact on your monthly bill, potentially seeing savings of up to 20 percent.

Why remodeling a bathroom is expensive?

You might be wondering why it's so pricey, and whether or not it's worth the investment. There are many reasons why a bathroom remodel may cost more than you think, including: inefficient layouts, complex plumbing systems, outdated design features and materials, high-end fixtures and appliances.

How much profit on a bathroom remodel?

Gross profit margin (GPM) is the amount you add to an estimate to cover your overhead and profit. It is calculated as a percentage of project costs. According to Remodeling magazine, GPMs need to be 35% to 38% on average.

Can a plumber leave you without a toilet?

This is all dependent on the type of work being carried out and to what extent the bathroom layout has been changed." "Most professional tradesmen will always plan to leave you with a functioning wc, they should discuss the logistics with you as we have a commitment to ensure the customers basic requirements.

What makes a toilet need to be replaced?

Replacing an old toilet makes the most sense under the following conditions: It is damaged – Most toilets are made from porcelain or other ceramics, and once they crack or break, they must be replaced. Even fine cracks can cause leaks and water damage.

Should you caulk around a toilet?

Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

Can a shower and toilet share a drain?

Conclusion. In short, it is possible to connect the toilet drainage line and the shower drainage line, as long as they both have separate waste trap arms. However, do note that combining them may also lead to blockages, which can cause smells to come from certain drains.

How do you prepare a bathroom for remodeling?

How much does it cost to move a toilet to the other side of the bathroom?

Cost of Moving Plumbing Fixtures

The cost to move a toilet or sinks can be $2,500-$3,500 per fixture.

What are the best times to go to toilet?

Choose a regular time each day to try to have a bowel movement. As a general rule, the best time is 20 to 40 minutes after eating. Most doctors recommend going in the morning, about 20 minutes after eating breakfast. Spend 10 to 15 minutes on the toilet to see if you can have a bowel movement.

Can a toilet last for 50 years?

Toilets can last for up to 50 years under average conditions. However, this doesn't mean that you won't need to spend money maintaining it throughout its useful life.

How long does it take a plumber to remove and install a new toilet?

It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour. If the plumber runs into any unexpected issues after the installation begins, it can raise labor costs by as much as $800.

What is the color trend for bathrooms in 2023?

According to top interior designers, modern blue, light green, and warmer neutral bathroom color schemes are popular in 2023. These are a continuation of 2022's best bathroom color trends in many ways. In a similar fashion, shades like taupe, all-white bathrooms, and warm natural undertones are also trending this year.

What is the biggest expense in bathroom remodel?

Usually, the most expensive part of a bathroom remodel is labor, tile work, and plumbing. While these areas are superior, there are other aspects like layout changes, shower, etc., that can raise the budget according to your preferences.

What do you splurge on in a bathroom renovation?

How can I reduce the cost of remodeling?

What comes first in bathroom remodeling?

Install the vanity first, including the sink and faucet. Once you have the drain hooked up to the faucet, you can move on to the other essentials such as the mirror, cabinets and trim around the shower or tub.

What is the most essential part of a bathroom?

With this in mind, the essential items outlined below are not only useful but also aesthetically pleasing. This includes bath towels, a bath mat, an area rug, a shower curtain, storage baskets, a trash can, a soap dispenser, a toothbrush holder and a hamper.

What is the hardest thing to remove in a bathroom Reno?

"Wallpaper is known to be difficult to remove; so, if you have some in your bathrooms that are quite quirky or bold, it might be off-putting to the buyer. The thought of wallpaper removal could be the one thing that turns their head in a new direction."

Should I replace my 10 year old toilet?

On average, most toilets will have a lifespan of between 10 and 15 years, even with regular use. The lifespan may vary depending on the toilet model and the wear and tear it experiences over the years. Most toilets will start to give you warning signs indicating the time for replacement is near.

How often should a toilet be replaced?

Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

How many years does on average a toilet last?

Share: Toilets can last for up to 50 years under average conditions. However, this doesn't mean that you won't need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.

Do new toilets flush better than old ones?

Many tend to associate lower flow with lower flushing power. Not true. New technology and design advancements, such as pressure-assisted flushers and modifications to bowl contours allow high-efficiency toilets to flush better than first-generation low-flow toilets.

Do older toilets clog more?

Older Low Flow Toilets

Poor flushing pressure leaves material behind which results in constant clogs. What to do: Replacing your older low flow toilet is a sure-fire way to eliminate constant clogs caused by lack of flushing pressure.

How long does it take a plumber to install a new toilet?

In essence, that depends on your skill level and experience, plus the type of toilet you have. If you've done this before, it should be a piece of cake. However, if it's your first time, and depending on the complexity of the job, it could take anything from one to four hours on average.

Do old toilets wear out?

Do toilets wear out? Well, no, not actually. The bowl and the tank are built to last for ages. The parts inside the tank, the flush handle, the seat, the lid and the bolts that hold the toilet to the ground and the seal around the base of the toilet may need toilet repair or replacement.

Is it OK to put bleach in toilet?

Frequently asked questions. Can you put bleach in a toilet bowl? Yes, Clorox® Bleach is safe to add to the water in the toilet bowl. Always flush the toilet first before scrubbing, and then again when toilet cleaning is finished.

How long does a toilet wax ring last?

Here's what to know. Every toilet in your home has a wax ring connecting it to your plumbing, which creates a waterproof seal to keep what goes down to the sewer from seeping out the sides. This piece of equipment usually lasts as long as the toilet, about 30 years.

How do you know when a toilet is bad?

Everything in your toilet should go down in one swoosh after pushing the toilet handle. If you find that your toilet isn't sending everything away after your first flush, then it could be a sign that it is time to retire your commode and upgrade to a newer model.

How much does it cost to install a toilet?

According to HomeAdvisor and Angi, toilet installation costs range from $224 to $532, with the national average at $372. The overall cost depends on the type of toilet and the complexity of the job. It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour.

Do round or elongated toilets flush better?

Elongated bowls may also be slightly easier to use for taller adults and may flush with somewhat more force than round toilets. This might mean they're slightly easier to clean regularly and require fewer “double flushes” to empty the bowl after use.

What are better one-piece or two-piece toilets?

Because of their connected frame, one-piece toilets are easier to clean and maintain. Two-piece toilets tend to accumulate more bacteria in the space between the tank and bowl, which makes them harder to clean and the upkeep more time-consuming.

What are the pros and cons of a two-piece toilet?

The Two-Piece Toilet

Likewise, it allows you to mix and match tanks and bowls, and it tends to be less expensive than a one-piece model. The two-piece version also includes flushing and water-saving options. However, two-piece toilets can be harder to clean, more likely to break and less compact than the one-piece.